water treatment plant hydrolyzed anionic polyacrylamide system
Product Description
Water Treatment plant hydrolyzed anionic Polyacrylamide system
This product is a water- soluble high polymer.It's not soluble in most organic solvents, with good flocculating activity, and can reduce the friction resistance between liquid.
1. It is mainly used for the sludge dewatering and decrease the rate of water content of sludge.
2. It can be used to treat industrial wastewater and life sewage water.
3. It can be used for papermaking to improve dry and wet strength of paper and to improve dry and wet strength of paper and to increase the reservation of tiny fibers and fillings.
Except above application field,CPAM or PAM can use many industry,E.G paper making auxiliary chemicals,textile sizing agent,oil-filed chemicals,sugar waste water, Beverage factory wastewater)
1. Easy to dissolve, dissolve time 40min.
2. High efficiency.
3. High molecular, molecular weight 10million.
4. High purity, without impurity.
Item | anionic polyacrylamide pam | |||
Appearance | white fine-sand shaped powder or colorless transparent colloid | |||
Molecular weight | 15million~20million | |||
Ionicity | 8 | 15 | 25 | 40 |
Note: our product can be made upon your special request. |
1. The product should be prepared for the water solution of 0.1% as concentration. It is better to use neutral and desalted water.
2. The product should be scattered evenly in the stirring water, and the dissolving can be accelerated by warming the water (below 60°C).
3. The most economical dosage can be determined based on a preliminary test. The pH value of the water to be treated should be adjusted before the treatment.
1. The solid product can be packed in inner plastic bags, and further in polypropylene woven bags with each bag containing 25Kg.The colloidal product can be packed in inner plastic bags and further in fiber plate drums with each drum containing 50Kg or 200Kg.
2. This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35 celcius .
3. The solid product should be prevented from scattering on the ground because the hygroscopic powder can cause slipperiness.
NEW Roman', serif; font-size: 16px; vertical-align: baseline;">is located in Yixing, Jiangsu Province, China (about 200km from Shanghai). We specialize in providing chemicals and service for treatment of industrial waste water and urban sewage.
Our products with strong capacities of decolorization and removal of COD,BOD. They are mainly used for waste water treatment of textile, dyeing, paper-making, printing, mining, ink and so on. In addition, our flocculant agent also can be used as retention agent in the production of paper & pulp.
Main products:
Fixing Agent
Poly Aluminium Chloride(PAC)
PolyDADMAC
Polyamine
Polyacrylamide (PAM)/Polyelectrolyte
Dicyandiamide (DCDA)
Aluminum Chlorohydrate ( ACH )
Ferrous Sulfate
Contact us if you need more details on Anionic Polyacrylamide APAM. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Hydrolyzed Anonionic Polyacrylamide、Water Treatment Plant Anionic Polyacrylamide System. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : PAC Series