Trade Assurance cationic anionic polyacrylamide flocculant PAM for sludge dewatering agent
Product Description
NEW roman', times; font-style: inherit; font-weight: inherit; vertical-align: baseline;">Yixing Cleanwater Chemicals Co., Ltd
PAM -CPAM - Cationic Polyacrylamide
Cationic Polyacrylamide used for improving dry and wet strengeh of paper
APAM- anionic polyacrylamide
Description:
This product is a water- soluble high polymer. It’s not soluble in most organic solvents, with good flocculating activity, and can reduce the friction resistance between liquid.
Application Field:
1. It is mainly used for the sludge dewatering and decrease the rate of water content of sludge.
2. It can also be used to treat industrial wastewater and life sewage water.
3. It can be used for papermaking to improve dry and wet strength of paper and to improve dry and wet strength of paper and to increase the reservation of tiny fibers and fillings.
Specifications:
Item | Cationic type |
Appearance | white fine-sand shaped powder or colorless transparent colloid |
Molecular weight | 8million~10million |
Ionicity | 5~80% |
Note: our product can be made upon your special request. |
Application Method:
1. The product should be prepared for the water solution of 0.1% as concentration. It is better to use neutral and desalted water.
2. The product should be scattered evenly in the stirring water, and the dissolving can be accelerated by warming the water (below 60 °C).
3. The most economical dosage can be determined based on a preliminary test. The pH value of the water to be treated should be adjusted before the treatment.
Package and Storage:
1. The solid product can be packed in inner plastic bags, and further in polypropylene woven bags with each bag containing 25Kg.
2. This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35°C.
3. The solid product should be prevented from scattering on the ground because the hygroscopic powder can cause slipperiness.
Product Categories : PAC Series