Water Purifier for Textile Effluent
Product Description
NEW Roman, Times, serif;">
Our BWD-01 Water Decoloring Agent is mainly used for water purifer for textile effluent, dyestuff printing and washing wastewater.
Specification:
Appearance: Transparent sticky liquid
Viscosity: 50 - 250mPa. S (20º C)
Solid content: 50% MIN
PH 30% solution: 3 - 5
Specific gravity: 1.2 - 1.3 (25º C)
Advantage:
1, Biggest manufacturer and supplier of decoloring polymers in the world
2, More than 10 yeasrs experience in production and 15 years experience in Water Treatment
3, Professional technical service team(8 engineers) to help you
4, Have reserved sample more than 1 year for quality tracking
5, Automatic control during the production, keep quality good and stable.
6, General chemical, harmless, no-flammable and non-explosive
Application range:
A) Textile effluent
B) Dyeing&Washing wastewater
C) Paper making wastewater
D) Chemical wastewater
E) Other wastewater
Usage:
A) Dilutes with 10 - 40 times water and then dosed into the waste water directly
B) PH index of the waste water should be adjusted to 7 - 10 for better result
C) If colority and COD are relatively high, it can be used with the help of Polyaluminum chloride to reduce treatment cost, whether polyaluminum chloride is used before or afterwards depends on the flocculation test and the treatment process
Storage:
Can be stored at room temperature, within a temperature range of 10 - 30º C
Packing:
30kg/pail, 250kg/plastic drum and 1250kg IBC tank.
Jar test process for BWD-01Water Decoloring Agent:
1. Make solution of BWD-01, mix with 40 times water to have 2.5% solution for use.
2. Make PAC solution, 1-3% Al2O3
3. Have solution of anionic Polyelectrolyte, 0.1%.
4. Have effluent, test pH value, adjust pH value to 8-9. (It is very important, higher or lower PH, BWD-01 works not well)
5. Add PAC solution, mix with effluent completely. About 1-3 minutes
6. Add BWD-01 solution, mix with effluent completely, about 5-10 minutes
7. Add small content of anionic polyelectrolyte solution, mix slowly to have big floc.
8. Sedimentation
9. Check color for treated effluent
10. Adjust dosage of BWD-01 and PAC to do more test to have better testing result
Bluwat Chemicals is a professional supplier of Water Treatment Chemicals in China. Our core products are coagulants and flocculants for the treatment of water.
We are exporting our chemicals to more than 53 countries in the world. We do OEM for Nalco, Kemira, SNF and BASF for years, we hope you are the next.
Our BWD-01 Water Decoloring Agent is mainly used for water purifer for textile effluent, dyestuff printing and washing wastewater.
Specification:
Appearance: Transparent sticky liquid
Viscosity: 50 - 250mPa. S (20º C)
Solid content: 50% MIN
PH 30% solution: 3 - 5
Specific gravity: 1.2 - 1.3 (25º C)
Advantage:
1, Biggest manufacturer and supplier of decoloring polymers in the world
2, More than 10 yeasrs experience in production and 15 years experience in Water Treatment
3, Professional technical service team(8 engineers) to help you
4, Have reserved sample more than 1 year for quality tracking
5, Automatic control during the production, keep quality good and stable.
6, General chemical, harmless, no-flammable and non-explosive
Application range:
A) Textile effluent
B) Dyeing&Washing wastewater
C) Paper making wastewater
D) Chemical wastewater
E) Other wastewater
Usage:
A) Dilutes with 10 - 40 times water and then dosed into the waste water directly
B) PH index of the waste water should be adjusted to 7 - 10 for better result
C) If colority and COD are relatively high, it can be used with the help of Polyaluminum chloride to reduce treatment cost, whether polyaluminum chloride is used before or afterwards depends on the flocculation test and the treatment process
Storage:
Can be stored at room temperature, within a temperature range of 10 - 30º C
Packing:
30kg/pail, 250kg/plastic drum and 1250kg IBC tank.
Jar test process for BWD-01Water Decoloring Agent:
1. Make solution of BWD-01, mix with 40 times water to have 2.5% solution for use.
2. Make PAC solution, 1-3% Al2O3
3. Have solution of anionic Polyelectrolyte, 0.1%.
4. Have effluent, test pH value, adjust pH value to 8-9. (It is very important, higher or lower PH, BWD-01 works not well)
5. Add PAC solution, mix with effluent completely. About 1-3 minutes
6. Add BWD-01 solution, mix with effluent completely, about 5-10 minutes
7. Add small content of anionic polyelectrolyte solution, mix slowly to have big floc.
8. Sedimentation
9. Check color for treated effluent
10. Adjust dosage of BWD-01 and PAC to do more test to have better testing result
Bluwat Chemicals is a professional supplier of Water Treatment Chemicals in China. Our core products are coagulants and flocculants for the treatment of water.
We are exporting our chemicals to more than 53 countries in the world. We do OEM for Nalco, Kemira, SNF and BASF for years, we hope you are the next.
Product Categories : Water Decoloring Agent (Color Removal Chemicals)
Other Products
Hot Products
Paint fog flocculant Coagulant for for spray booth remove paintACH Liquid Aluminium Hydroxychloride 50%Deodorizing Agents to remove smell Chemical Auxiliary Agent n1Rubber product wastewater treatment rubber deodorant odor controlFood grade aluminium ammonium sulfate/ammonia alum/ammonium alumHigh Quality Poly dadmac Water TreatmentFormaldehyde free fixing agent Excellent stabilityDEODORIZING AGENT to remove bad smell BacteriaCleanwater CW-05 High Quality Water Decoloring Agent For Thailand Dyeing IndustryOrganic Coagulant PolyDADMAC for Effluent TreatmentDecolor Agentwater treatment chemicals polymer polyamineNew Price Effluent Decolorant ChemicalsPAC Polyaluminium Chloride10% Liquid PAC in high purityPolyacrylamide